What Does 9D Mean on a Screen Protector — and How Glass and Film Protectors Really Differ
Screen protectors are sold with labels such as 2.5D, 5D, 9D, 21D and “9H hardness”. They look like measurements, so it’s natural to assume that a bigger number means a stronger protector. Most of these labels don’t mean what they seem to.
This guide explains what the labels actually refer to, how glass, liquid-glue, film, privacy and blue-light protectors differ according to their own makers, and what Apple, Samsung and Google say about protectors on their phones. Every factual claim links to its source; where we describe what we see in our own workshop, we say so.
In short
- No standard defines 5D, 9D or 21D. Glass makers and researchers use only 2D, 2.5D and 3D — terms for the shape of the edge, not for strength. Brands that use bigger numbers contradict each other.6,7,3,39,40
- “9H” is a pencil grade, not Mohs hardness. It comes from a pencil test written for paint and lacquer films. On the Mohs mineral scale, a glass plate sits at about 5.5 and quartz at 7.1,2,3,13
- “Tempered” doesn’t always mean the same thing. Corning strengthens phone glass by ion exchange, and Belkin says it does the same for some premium protectors; another supplier describes tempering as heating and rapid cooling.9,34,41
- How a protector is glued matters. Samsung warns that glass glued only along the edges may not stick to the whole screen, leaving areas where touch works intermittently.23
- Protectors can get in the way of sensors. Apple says to remove anything covering the Face ID camera; Samsung and Google say protectors can reduce fingerprint recognition — Google says so even for certified ones.19,22,29
- Nobody guarantees the screen underneath. Belkin and PanzerGlass say a protector can’t rule out damage, and Consumer Reports calls a protector non-essential.35,48,51
- From our workshop: we often see a protector that cracked while the display underneath survived — and cheap edge-glued “9D” glass lifting at the edges.
What 2.5D, 3D and “9D” actually mean
Glass makers and researchers use three terms for the shape of cover glass. A Corning patent defines 2D cover glass as glass with chamfered (ground) edges, 2.5D as glass whose edge has a curved surface on the front side, typically made by polishing, and 3D as glass with a bent edge that makes the sheet non-planar, shaped by thermal or cold forming.6 A 2022 peer-reviewed paper on moulding phone cover glass uses the same three classes: 2D is a flat plate, 2.5D is an intermediate stage, and 3D is moulded from flat glass by hot forming.7 Corning uses “3D” for cover glass formed so that the image can flow down the sides of the phone.8
Protector makers borrowed the same words. Belkin describes a flat protector with “2.5D edges” and notes that it may not reach the edge of the iPhone screen, so that it fits under a case.33 UL Solutions, an independent certifier, says in one of its verifications that 2.5D and 3D differ only in the curvature of the protector’s edge.3
So where do 5D, 9D and 21D come from?
From brands, not from standards. The brands that explain these labels contradict each other:
- PITAKA says 3D glass is curved along the sides but square-cut at the top and bottom, while 5D is curved on all four sides; it also claims that 5D gives a better touch experience and higher sensitivity.39
- Mietubl, a protector maker in Guangzhou, says the D terms describe how the edge is processed, and that there is no product difference between 4D, 5D, 6D, 9D and 11D — the names are market labels that can’t define the product.40 In the same article it promotes its own “11D Full Curved” glass, which it describes as following the 3D curve of the screen.40
- Even the basic terms don’t match: Mietubl describes 3D glass as curved in the middle as well as at the edge, which isn’t PITAKA’s definition.40,39
We searched the ISO, ASTM and IEC catalogues and found no standard that defines 5D, 9D, 21D or any similar number. The only standards that protector makers and certifiers cite are pencil-hardness tests, covered below.1,2,3 At most, a D number tells you something about the edge shape — and even that depends on the brand. What matters is whether the protector fits your phone’s screen and how it’s glued.
What “9H” means — and why it isn’t Mohs
“9H” comes from the pencil hardness test. ASTM D3363 measures the hardness of an organic coating — a paint or lacquer film — on metal or a similarly hard surface, using pencil leads of known hardness.1 Its international counterpart, ISO 15184, is a test for paints and varnishes in which pencils of known hardness are pushed over the film.2,1 The pencil is held at 45 degrees.5
Both standards limit what the result can tell you. ASTM says results may vary between laboratories using different makes of pencil, and that the test is useful for ranking coatings with significant differences in hardness.1 ISO says the test hasn’t been found useful for comparing the pencil hardness of different coatings.2
When UL Solutions verified a protector maker’s “9H” claim, it used ISO 15184 on a pencil scale running from 9B, the softest, to 9H, the hardest.3 Belkin states its own 9H rating under ASTM D3363, and rates its PET film at 3H.33,34 In other words, “9H” means the hardest pencil in the test set didn’t mark the surface.
The Mohs scale is something else
Mineralogists rank hardness on the Mohs scale by which material can scratch which. The US National Park Service lists talc at 1, quartz at 7, corundum at 9 and diamond at 10, and puts a knife blade or glass plate at about 5.5.13 Sapphire is a variety of corundum, at 9.14 Quartz is also very common: the US Geological Survey calls it the most abundant soil mineral across the United States.15
We found no official conversion between pencil grades and the Mohs scale. Corning’s data sheet for Gorilla Glass Victus gives neither: it lists Vickers hardness and a diamond scratch threshold in newtons instead.11 Corning is also specific about how scratches happen: one of its patents says visible scratches on phone cover glass come mainly from sharp contact in a single event, and that phone covers don’t typically see the sliding abrasion caused by sand, gravel or sandpaper.12
The glass in your phone vs the glass on top
Phone cover glass such as Gorilla Glass is chemically strengthened. Corning explains that glass breaks from flaws on its surface when those flaws are under tension. In its ion-exchange process, the glass soaks in molten salt; larger potassium ions replace smaller sodium ions near the surface and create a layer of compressive stress that helps the glass resist damage.9,10 Corning says this lets the glass keep more of its strength after a minor nick or scratch — not that it can’t be scratched.9
Apple’s Ceramic Shield goes a step further. Apple describes it as a glass-ceramic developed with Corning: a high-temperature crystallisation step grows nano-crystals inside the glass, kept small enough for the material to stay transparent.16 It first appeared on the iPhone 12 lineup, with Apple claiming four times better drop performance than the previous iPhone.17 On the iPhone 17, Ceramic Shield 2 adds an Apple-designed coating that, Apple says, gives three times better scratch resistance and reduces glare.18 The front glass also has an oil-repellent coating, which Apple says wears over time with normal use.20
Protector glass is a separate product with its own processes. Belkin says some of its premium protectors are chemically strengthened by single or double ion exchange, and describes others simply as tempered glass.34 A Hong Kong protector supplier describes tempered glass as glass that has been heated and then cooled very quickly.41 Unless the maker says which process it uses, the word “tempered” alone doesn’t tell you.
Strength claims don’t share a baseline either. Belkin advertises one protector as up to 15 times stronger than “traditional glass”, citing third-party tests it doesn’t name, while the same supplier says tempered glass is up to five times stronger than normal glass.33,41 These figures can’t be compared.
Types of protectors — and what their makers say
Each claim below is the maker’s own unless we say otherwise.
Tempered glass: glued at the edges or across the whole screen
Glass protectors differ in how they’re glued. Mietubl describes two common designs: full-coverage glass, and glass with a plastic or glass-fibre edging.40 UL’s verification of one maker’s range notes that its versions share the same glass, thickness and coating but use different adhesives.4
Samsung warns about glue that runs only along the edges. Some protective glass and film that Samsung hasn’t approved has adhesive only on the side edges, may not stick to the whole screen, and can leave areas that don’t recognise touch or respond intermittently.23 Samsung lists lifting at the edges and bubbles in the middle among the problems with unauthorised protectors.25
UV liquid-adhesive glass
Some glass is attached with a liquid adhesive that is cured with a UV lamp. Whitestone, which makes Dome Glass, says its adhesive covers the whole screen including the edges, unlike glass glued only at the edge.43 Its own instructions show how much care this takes: a level surface, masking tape over the speaker, waiting for the adhesive to spread, then two rounds of UV curing.42 Whitestone says the adhesive also hardens under the UV in sunlight and fluorescent light, that a bubble can’t be removed once cured, and that the kit includes about 5% more adhesive than needed so that it fills every corner.43
On spills, Whitestone says the liquid is “like water” and that phones are generally waterproof, so it won’t normally get inside.43 Apple, however, says splash, water and dust resistance isn’t a permanent condition and may decrease as a result of normal wear — and that liquid damage isn’t covered by its warranty.21
Films: PET, TPU and “hydrogel”
Belkin says its PET and TPU film protectors are about 0.10 mm thick, that PET won’t crack or chip, and that it’s rated 3H on the pencil scale — moderate scratch resistance, but little impact protection.34
Flexible TPU films are often sold as “self-healing”. Spigen advertises self-healing technology for its Neo Flex film, which is applied wet and left to dry overnight; PITAKA says TPU has only limited self-healing abilities because it’s elastic.44,39 These are the makers’ own claims: we found no independent test or standard for self-healing. Nor did we find a maker that publishes what its “hydrogel” film is actually made of, so judge films by the specifications that are published — material, thickness and adhesive — rather than by the name.
Privacy protectors
Privacy filters work like microscopic blinds. 3M describes microlouver and nanolouver technology that blacks out the screen beyond a certain viewing angle, and PanzerGlass compares its filter to window blinds.45,47 PanzerGlass and 3M give a 60-degree viewing angle; Belkin describes ±30 degrees for its iPhone protector.47,46,38 Brands don’t always describe the technology the same way: Belkin’s buying guide credits 3M’s micro-louver technology, while a Belkin blog post speaks of polarised plastic.34,38
The trade-off is brightness. PanzerGlass says the screen is slightly darker with its privacy protector, and 3M says even its brighter laptop filter passes about 85% of the light.47,45 Belkin’s two-way privacy glass works in portrait only: turn the phone to landscape and the screen can be seen from all angles.37
Matte (anti-glare)
3M says a matte finish helps reduce glare and fingerprints.45 The American Academy of Ophthalmology mentions a matte screen filter as one option against eye strain, alongside adjusting the room lighting and the screen’s contrast.54
Blue-light filters
The American Academy of Ophthalmology says there is no scientific evidence that light from computer screens damages the eyes, and doesn’t recommend any special eyewear for computer use; it adds that several studies suggest blue-light-blocking glasses don’t improve digital eye strain.54,55 It does accept that blue light affects the body’s sleep–wake rhythm, and suggests limiting screen time in the two to three hours before bed and using night-time settings.55
Makers’ claims are narrower than they look. Belkin says its blue-light glass reduces 60% of blue light — but its own footnote limits that figure to the 435–440 nm band.36 PanzerGlass says it doesn’t know exactly how much its filter reduces the effects of blue light.47
| Type | What it is | What to know |
|---|---|---|
| Glass, glued at the edges | Glass with adhesive only along the side edges.23 | May not stick to the whole screen; touch can respond intermittently (Samsung).23 |
| Glass, UV liquid adhesive | Adhesive spread across the whole screen and cured with a UV lamp.43,42 | Level surface and speaker masking needed; bubbles are permanent once cured (Whitestone).42,43 |
| PET film | Thin plastic film, about 0.10 mm (Belkin).34 | Rated 3H; little impact protection (Belkin).34 |
| TPU film | Flexible film, applied wet (Spigen).44 | “Self-healing” is the makers’ own claim.44,39 |
| Privacy | A micro-louver filter.45,34 | Darker screen; two-way filters work in portrait only.47,37 |
| Matte | An anti-glare surface.45 | Reduces glare and fingerprints (3M).45 |
| Blue-light | A filter for part of the blue spectrum — 435–440 nm for Belkin’s 60% figure.36 | The AAO finds no evidence that screen light damages the eyes.54 |
Listed for information, not ranked. All descriptions are the makers’ own unless marked.
What Apple, Samsung and Google say
Apple
Face ID needs a clear view. Apple says to remove anything covering the TrueDepth camera, including a screen protector, and for iPhone 18 Pro models suggests removing screen protectors that cover the TrueDepth camera.19 Apple also notes that on iPhone 18 Pro models the TrueDepth camera sits at the top, towards the left corner — another reason to buy a protector made for your exact model.19
Samsung
Samsung says protective glass or a thick screen protector may lower fingerprint recognition and recommends its own genuine film. Air gaps or dirt between the film and the screen can also reduce recognition, and after removing or fitting a protector you should register your fingerprint again.22 Samsung notes that some protective films can interfere with ultrasonic fingerprint sensors such as those in the Galaxy S24.26
If touch feels weaker, Samsung’s Touch sensitivity setting, under Settings → Display, is designed for use with a screen protector.23,24 Samsung also warns that non-genuine protectors can cause touch and gesture problems, especially around the screen edges, and recommends accessories with its “Designed for Samsung” mark.24,25
Foldables are a special case. Samsung tells owners not to remove the protective top layer from the main screen and not to attach adhesive accessories such as protectors; the factory protector is designed to withstand folding, and replacing it is a job for an authorised service centre.27,28 In its US support pages, Samsung says its warranty doesn’t cover damage caused by removing that protector yourself.27
Google Pixel
Google says screen protectors can interfere with the Pixel’s fingerprint sensor and recommends Made for Google certified protectors; a non-certified one may affect the sensor’s function or security.29,30 Even with a certified protector, Google warns that fingerprint performance may be worse than without one, and that the sensor needs to recalibrate over the first few hours or days.29 Google suggests applying the protector before setting up Fingerprint Unlock, and offers a Screen protector mode to increase touch sensitivity.29,31 If touch problems persist, it suggests removing the protector to test — noting that you may not be able to put it back on.32
Does a protector actually save the screen?
We found no controlled independent test showing how often protectors prevent cracks. Consumer Reports says today’s phones are more scratch-resistant and a protector isn’t essential, though it can buy some peace of mind — its expert pictures a phone falling face down onto a rock or another jagged surface — and can help with trade-in value.51 In 2022, a Consumer Reports expert described a protector as “sacrificial glass”: better to replace a cracked $20 protector than the screen.52 Which? fits a fresh protector before each case drop test so that any cracks can be blamed on the case — it doesn’t test the protectors themselves.53
Makers say the protector breaks so the screen doesn’t — Belkin’s buying guide puts it exactly that way.34 Their legal terms are more careful. Belkin’s protector warranty excludes any damage to the device, says no screen protector can eliminate the possibility of damage in every situation, and gives a lifetime warranty only in North and South America — in Europe it is two years.35 PanzerGlass says its protector isn’t a guarantee that your screen won’t break, and its warranty covers manufacturing defects only.48 The Cyprus version of ZAGG’s warranty policy says its warranties don’t cover third-party devices — in other words, your phone.50
The only screen guarantee we found is a paid add-on. On ZAGG.com, the Screen Repair Guarantee costs an extra $10–20 and covers one screen repair of up to $250 within a year of activation, through WarrantyLife, with exclusions.49 We couldn’t confirm that it’s offered in Cyprus or elsewhere in the EU.
From our workshop
From our workshop — these are our own observations, not manufacturer statements:
- The protector often takes the hit. We often see phones where the protector cracked and the display underneath survived.
- Cheap edge-glued glass lifts. Cheap “9D” glass with glue only at the edges often lifts at the edges: bubbles, a light halo around the edge of the screen, and dirt getting underneath.
- Sensors. We see protectors interfering with sensors — fingerprint unlock on Samsung phones, the proximity sensor and Face ID.
- UV glue in the wrong places. We see UV glue that has seeped into openings: the speaker, the buttons, and under the frame.
- We don’t sell or fit screen protectors. This guide is here to help you choose one; what we do is replace screens when they break.
How to choose a screen protector
- Ignore the D number as a sign of quality. No standard defines 5D, 9D or 21D, and brands contradict each other.6,7,39,40
- Treat “9H” as a pencil grade from a paint-film test, not as proof of scratch resistance or a Mohs value.1,2,13
- Prefer glass that is glued across the whole screen, not only along the edges.23
- Check sensor compatibility. On a Pixel, look for Made for Google certification; on a Galaxy, Samsung genuine or “Designed for Samsung”. Register your fingerprint again afterwards.29,22,25
- On an iPhone, keep the TrueDepth camera area clear.19
- On a Samsung foldable, leave the factory layer on the main screen and don’t add an adhesive protector.27
- With UV glue, follow the maker’s instructions exactly — level surface, masking over the speaker, and a check for bubbles before curing.42,43
- Know the trade-offs: privacy glass makes the screen darker, and blue-light glass isn’t eye protection.47,54
- Read the warranty: it covers the protector, not your phone.35,48,50
FAQ
What does 9D mean on a screen protector?
Is 9H the same as hardness 9 on the Mohs scale?
Is a glass protector or a film better?
Will a screen protector stop my screen from cracking?
Why doesn’t Face ID or my fingerprint work after fitting a protector?
Are UV liquid-glue protectors safe for my phone?
Do blue-light screen protectors protect your eyes?
Do you sell or fit screen protectors?
Sources
Sources are in English unless marked otherwise. All links checked on 18 November 2026; Corning and Whitestone pages, which were unavailable that day, are cited with archived copies.
Standards, testing and certification
- ASTM International — ASTM D3363-22: Standard Test Method for Film Hardness by Pencil Test
- ISO — ISO 15184:2020 Paints and varnishes — Determination of film hardness by pencil test
- UL Solutions — Verification V804216: 9H hardness per ISO 15184 (J-Ting Co., Ltd screen protectors)
- UL Solutions — Verification V578471 (J-Ting Co., Ltd screen protectors)
- Elcometer — Elcometer 3080 Hardness Testing Pencils: operating instructions (PDF)
Glass, minerals and research
- Corning Inc. — US patent 11370698 B2: Masking and fixturing of a glass-based article during a coating process (definitions of 2D, 2.5D and 3D cover glass)
- Park J. et al. (2022). Two-Step Glass Molding Process for Forming Glass Edges with Obtuse Angles for Mobile Displays. Micromachines 13(7):1032
- Corning — 3D Glass: It’s the Shape of Things to Come (archived copy, accessed 18 Nov 2026)
- Corning — How It Works: Strengthening Glass (archived copy, accessed 18 Nov 2026)
- Corning — The Secret of Tough Glass: Ion Exchange (archived copy, accessed 18 Nov 2026)
- Corning — Gorilla Glass Victus product information sheet (PDF; archived copy, accessed 18 Nov 2026)
- Corning Inc. — US patent 9359261 B2: Low-color scratch-resistant articles with a multilayer optical film
- U.S. National Park Service — Mohs Hardness Scale
- Gemological Institute of America (GIA) — Sapphire
- U.S. Geological Survey — Quartz (soil geochemistry of the conterminous United States, SIR 2017-5118)
Phone makers
- Apple Newsroom — Apple awards Corning $45 million from its Advanced Manufacturing Fund (May 2021)
- Apple Newsroom — Apple announces iPhone 12 and iPhone 12 mini (October 2020)
- Apple Newsroom — Apple debuts iPhone 17 (September 2025)
- Apple Support — If Face ID isn’t working on your iPhone or iPad Pro
- Apple Support — How to clean your iPhone
- Apple Support — Important handling information for iPhone (iPhone User Guide)
- Samsung Support — I feel the fingerprint recognition rate became low after software update
- Samsung Support — What to do if your touch screen is not working properly
- Samsung Support — Troubleshoot touchscreen issues on a Samsung Galaxy device
- Samsung Support — Defects of unauthorised third-party protective films on Galaxy devices
- Samsung Support — Does the Galaxy S24 come with a screen protector?
- Samsung Support (US) — Care for your Samsung foldable phone
- Samsung Support — Screen protectors for Samsung Galaxy Z Flip and Fold
- Google Pixel Help — Use screen protectors with Fingerprint Unlock on your Pixel phone
- Google Pixel Help — Fix issues with your fingerprint sensor on your Pixel phone
- Google Pixel Help — Manage screen & display settings on a Pixel phone
- Google Pixel Help — Fix touch & response issues on your Pixel screen
Screen-protector makers
- Belkin — TemperedGlass Screen Protector for iPhone 17 / iPhone 16 Pro (product page)
- Belkin — Screen Protector Buying Guide: Glass, Privacy & Fit
- Belkin — Screen protector warranty (August 2025, PDF)
- Belkin — InvisiGlass Blue Light Filter Screen Protector for iPhone 17 / iPhone 16 Pro (product page)
- Belkin — TemperedGlass Privacy Treated Screen Protector for iPhone 16 / iPhone 15 / iPhone 14 Pro (product page)
- Belkin — Blue Light and Privacy Screen Protectors: Do They Work? (blog)
- PITAKA — Are All Screen Protectors the Same? How to Choose the Right One (blog)
- Mietubl — What is the difference between the 2D, 2.5D, 3D, 4D, 5D of the tempered glass screen protector product series? · What is the difference between 2.5D and 3D design · What is the differences between ceramic screen protector and glass screen protector (company news articles)
- Powell (Hong Kong) Limited — What is tempered glass screen protector? (FAQ)
- Whitestone — Dome Glass for Samsung Galaxy S23 Ultra (product page with installation steps; archived copy, accessed 18 Nov 2026)
- Whitestone — Q&A (archived copy, accessed 18 Nov 2026)
- Spigen — Pixel 7 Series Screen Protector Neo Flex (product page)
- 3M — Data Security: privacy filters
- 3M — Bright Screen Privacy Filter for Apple MacBook Pro 14 (BPNAP003) (product page)
- PanzerGlass — How do privacy screen protectors work?
- PanzerGlass — Warranty policies
- ZAGG — How do I activate my Screen Repair Guarantee?
- ZAGG — Warranty policy (Cyprus version, in Greek)
Independent testers and eye health
- Consumer Reports — The Best Phone Cases for Your Samsung Galaxy S26, S26+, or S26 Ultra (17 May 2026)
- Consumer Reports — The Best Cell Phone Case for Your Pricey Device (27 September 2022)
- Which? — Mous Limitless 6.0 vs Otterbox Defender: which is the best phone case? (updated 19 February 2026)
- American Academy of Ophthalmology — Are Blue Light-Blocking Glasses Worth It? (5 March 2021)
- American Academy of Ophthalmology — Should You Be Worried About Blue Light? (10 March 2021)
Cracked screen? Silent Cloud TECH in Limassol replaces phone screens — from €40. Diagnostics are €40, followed by a fixed quote before any work begins. Phones can also come by ACS courier from anywhere in Cyprus. Screen replacement.
Call +357 25 030 676 or +357 94 044 066, message us on WhatsApp, or find us on Telegram at @SilentCloud_Tech. English and Russian spoken.